← Back to Series

creator-3st-max-Table Benchtop Freeze Dryer

Inquiry

Pilot Freeze Dryers

Developing a peptide formulation? Compare Creator S/ST and Max configurations with the production requirements before choosing a model. Peptide freeze dryer selection: vial layout, water load and scale-up.

Benchtop freeze-drying platform

A benchtop Creator freeze dryer for small-batch formulation and lyophilization cycle studies. Three temperature-controlled shelves provide approximately 0.207 m² of total shelf area, with circulating silicone-oil heat transfer, a ≤−85 °C condenser and programmable vacuum regulation.

Product rendering based on the supplied engineering design; final appearance and configuration follow the approved order.

Technical specifications

Modelcreator-3st-max-Table
FormatBenchtop; external vacuum pump
Overall dimensions (W × D × H)904 × 838 × 839 mm
Shelf size / quantity228 × 302 mm / 3 shelves
Total shelf area0.206568 m² (approximately 0.207 m²)
Shelf temperature range−50 to +60 °C
Temperature control accuracy±0.5 °C
Shelf temperature uniformity±1 °C
Shelf cooling: +20 to −40 °C≤60 min
Shelf spacing / material60 mm / 316 stainless steel
Shelf heat-transfer mediumCirculating silicone oil (5 cSt)
Condenser minimum temperature≤−85 °C
Condenser cooling: +20 to −40 °C≤30 min
Ice capture / maximum ice capacity4 L / 24 h; 6 L max.
Condenser constructionDirect-cooled stainless steel coil
Refrigeration / heat rejection2 compressors, 7/8 HP each / air cooling
Ultimate pressure / control range<1 Pa / 1–50 Pa
Vacuum gaugeThermocouple vacuum gauge
Vacuum regulationProgram-controlled gas admission: solenoid valve + micro valve
Vacuum pumpExternal DRV 10, 10 m³/h, with mist filter
Circulation pump / heatersSJ stainless magnetic pump / 0.2 kW × 2 (duty + standby), overheat protection
Controller / displayPLC / 10-inch touchscreen
Operating modesAutomatic / semi-automatic / manual
Electrical requirements220–240 V, 50/60 Hz; 2.5 kW; 15 A breaker
Machine weight250 kg
Optional equipmentVial stoppering system; capacitance manometer (CM)

Configuration and installation

The vacuum pump is installed outside the cabinet; allow space for the pump, connections and cooling airflow. Vial stoppering and the capacitance manometer are optional. Endpoint comparison requires a suitable paired gauge configuration. Confirm vial size, fill volume, required stoppering and utility configuration when requesting a quotation. Ice capture capacity is a condenser rating, not a product batch-load guarantee.

Equipment and application videos

Share This Product

Inquiry for this Product

Related Products

SJ-Creator 1S Research FD — Pilot Freeze Dryers

SJ-Creator 1S Research FD

SJ-Creator 2S Research FD — Pilot Freeze Dryers

SJ-Creator 2S Research FD

SJ-Creator 3S Research FD — Pilot Freeze Dryers

SJ-Creator 3S Research FD

SJ-Creator 4S Research FD — Pilot Freeze Dryers

SJ-Creator 4S Research FD

Related Topics

China Freeze Dryer and Lyophilizer Manufacturer

SJIALAB connects Hong Kong international project coordination with freeze dryer and lyophilizer manufacturing in Ningbo, China, covering laboratory, pilot, pharmaceutical GMP, food, and industrial systems. For model recommendations and a quote, share your material, target batch size and installation country.

Learn More